RAN Sailing · βίντεο

Τι καλύπτει αυτό το βίντεο

Fairing and sanding the hull of a custom-built boat requires significant quantities of epoxy and filler, with the current project consuming approximately 40 to 50 kilograms of epoxy and 15 kilograms of West System 406 micro-balloon filler to achieve a fair surface.6:46 Working in temperatures as low as 2 to 5 degrees Celsius slows the curing process, necessitating the use of heaters to ensure the epoxy hardens sufficiently for sanding.8:00 The process involves using a random orbital sander to break the surface, followed by a longboard to level the hull.9:21

Before flipping the hull, several structural preparations are required: applying a barrier coat of epoxy to protect the hull from water, creating a physical template of the keel pocket to ensure a precise fit for the keel plate, and constructing sturdy plywood-and-steel cradle boxes to support the 11-to-12-ton vessel.16:34 Additionally, a temporary "roll cage" structure will be built around the hull to facilitate a controlled, two-step rotation during the flip.19:46 These preparations allow for a self-managed, gradual turnover process.21:13

Περισσότερα από το RAN Sailing

Will the Sanding EVER End? Building Our Dreamboat - Ep. 503 Ran SailingΣεπ 2026Something's Not Right Here! Building Our 52ft Sailboat - Ep. 502Σεπ 2026This Is Where Boat Builds Break People - Ep. 501 Ran SailingΑυγ 2026Our 52ft Sailboat Build Reaches Another Milestone! - Ep. 500 Ran SailingΑυγ 2026

Από RAN Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.