BoatworksToday · βίντεο

Τι καλύπτει αυτό το βίντεο

Mixing epoxy by volume rather than weight prevents curing failures, as resin-to-hardener ratios are calibrated for volumetric measurement.5:06 When working with small batches, apply the five-minute rule: mix only the amount of material that can be fully applied within five minutes to prevent the resin from overheating and hardening in the cup.8:47 For large-scale applications, pour the mixed resin onto the surface immediately to extend working time by spreading it into a thin layer.9:38 Avoid using U.S.-standard chopped strand matting with epoxy, as the styrene-based binder does not dissolve in epoxy, preventing the glass from conforming to radii or complex shapes.10:43 When selecting materials, prioritize 2:1 ratio epoxies for their lower viscosity, which eases fiberglass wet-out, and choose blush-free formulations to eliminate the time-consuming step of scrubbing away amine blush before secondary bonding.14:42 Adhering to these technical standards reduces rework and accelerates project timelines.

Περισσότερα από το BoatworksToday

V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Αυγ 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraΙουλ 2026Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!Ιουλ 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!Ιουλ 2026

Από BoatworksToday — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.