MJ Sailing · βίντεο

Τι καλύπτει αυτό το βίντεο

Matt and Jessica install an electric motor system in their catamaran by milling a custom coupler and bonding stainless steel engine mounts to the hull. To ensure a vibration-free fit, Matt modifies an off-the-shelf coupler at a machine shop, boring the center hole from 12mm to 25mm using a four-jawed chuck and a precision boring bar.▶ 1:36 After placing the motor, Matt aligns it by centering the unit within 6mm and using feeler gauges to verify the gap between the coupler and the drive shaft.▶ 17:23 He bonds the stainless steel mounts to the engine bed using Total Boat Structural Putty, followed by six layers of 12-ounce fiberglass cloth for permanent reinforcement.▶ 15:36 The project also includes routing ductwork for a 16,000 BTU air conditioning unit and planning the cooling system layout to prevent air bubbles in the heat exchanger.▶ 7:34 Matt emphasizes mounting seawater pumps below the waterline and ensuring all cooling lines maintain an upward slope to allow air to escape naturally.▶ 22:49

Περισσότερα από το MJ Sailing

The Details That Keep a Boat Dry (MJ Sailing - Episode 379)Ιουν 2026Preparing Our Catamaran for Paint—and Me for Captain's SchoolΙουν 2026The Bad News: We Have To Cut This Bulkhead Out (MJ Sailing - Episode 377)Μαΐ 2026We Almost Cooked Our Electrical System… So We Fixed It (MJ Sailing - Episode 375)Απρ 2026

Από MJ Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.