The Lazy Geckos ™ · βίντεο

Τι καλύπτει αυτό το βίντεο

To silence a slapping main halyard, release the line from the clutch, pull it down slightly to create slack, and re-tension it.2:59

Commissioning a Spectrum watermaker requires a multi-step process to ensure proper flow, salinity, and motor speed.5:05 After a full rebuild of the Clark pump and membrane system, the process begins by purging the system of air through the seacock and intake lines.5:20 Once primed, the unit runs in regular mode to verify output in gallons per hour and water quality in parts per million (PPM).7:15 If the output is low, the motor speed is adjusted using a magnet on the circuit board to reach the target performance without triggering a system shutdown.7:48 The final step involves testing the freshwater flush cycle to ensure the membrane is properly cleared of salt and debris.8:16 The system requires monitoring for leaks at plastic fittings and hose connections during the initial startup.8:58

Περισσότερα από το The Lazy Geckos ™

The Captain Put Her to Work - The Lazy Geckos Ep. 364Σεπ 2026Trying to Motivate The Captain! - The Lazy Geckos Ep. 363Σεπ 2026Downwind Sailing Never Looked This Good!- - The Lazy Geckos Ep. 362Σεπ 2026A Rare Moment We Never Expected To See! - The Lazy Geckos Ep. 361Αυγ 2026

Από The Lazy Geckos ™ — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.