The Lazy Geckos ™ · video

Hva denne videoen dekker

To silence a slapping main halyard, release the line from the clutch, pull it down slightly to create slack, and re-tension it.2:59

Commissioning a Spectrum watermaker requires a multi-step process to ensure proper flow, salinity, and motor speed.5:05 After a full rebuild of the Clark pump and membrane system, the process begins by purging the system of air through the seacock and intake lines.5:20 Once primed, the unit runs in regular mode to verify output in gallons per hour and water quality in parts per million (PPM).7:15 If the output is low, the motor speed is adjusted using a magnet on the circuit board to reach the target performance without triggering a system shutdown.7:48 The final step involves testing the freshwater flush cycle to ensure the membrane is properly cleared of salt and debris.8:16 The system requires monitoring for leaks at plastic fittings and hose connections during the initial startup.8:58

Mer fra The Lazy Geckos ™

10 Years Aboard and We're Finally Learning How To Relax! - The Lazy Geckos Ep. 365okt. 2026The Captain Put Her to Work - The Lazy Geckos Ep. 364sep. 2026Trying to Motivate The Captain! - The Lazy Geckos Ep. 363sep. 2026Downwind Sailing Never Looked This Good!- - The Lazy Geckos Ep. 362sep. 2026

Fra The Lazy Geckos ™ – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.