Catamaran Mistertong · βίντεο

Τι καλύπτει αυτό το βίντεο

Djé and Nad, owners of an Outremer catamaran, perform structural repairs on their vessel while anchored in the Caribbean. Djé prepares a scarf joint on a damaged section of the boat, using a corded angle grinder equipped with 80-grit flap discs to shape the plywood.1:25 He notes that the 80-grit discs provide efficient material removal without overheating the tool.6:35 After shaping the replacement plywood piece to match the existing scarf, he plans to bond the wood with adhesive before applying fiberglass reinforcement the following day.15:34

The couple coordinates a delivery of 12 plywood sheets, consisting of 12mm and 15mm thicknesses, to their anchorage.26:33 With assistance from a friend, they transport the lumber from a dock to the catamaran using a dinghy.24:05 Due to 20-knot wind gusts, they wrap the plywood in plastic sheeting and secure it with straps to prevent water damage from spray during transit.20:50 The project requires further material procurement from a second supplier to complete the structural repairs.25:22

Περισσότερα από το Catamaran Mistertong

#245 The break didn't last very long…Αυγ 2026#244 Worrying: Our boats held hostage in the CaribbeanΑυγ 2026#243 Locked in until when???Αυγ 2026#242 The engine is no longer spitting!!!Αυγ 2026

Από Catamaran Mistertong — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.