Salt & Tar · βίντεο

Τι καλύπτει αυτό το βίντεο

Fiberglassing the hull of a custom dinghy, named Little Red, requires multiple layers of 6-ounce cloth and epoxy to ensure durability for future cruising.3:48 The project involves deviating from the original plans to overbuild the structure, including adding extra layers to the bottom, transom, and bow to increase abrasion resistance for beach landings.6:07 The process involves cutting the fiberglass at the tape line while the epoxy is still in a pliable, gelled state to achieve clean edges.6:43 To manage the central California coastal marine layer and fog, the crew uses a makeshift tent to protect the curing hull.13:26 After completing the exterior glassing, the next steps include sanding, applying Total Fair epoxy putty to smooth transitions, and priming with an epoxy primer before repeating the fiberglassing process on the interior.10:38 The dinghy is designed to support a sail kit, rowing, or a small outboard motor for use alongside the mothership, Red Aviva, in Mexico.3:26 Overbuilding the hull with extra fiberglass layers provides necessary protection against the rigors of cruising.14:58

Περισσότερα από το Salt & Tar

Salt & Tar: Ep.361- IN-THE-WATER SurveyΟκτ 2026Meet Victoria - Tour of our William Garden 'Porpoise' built by Robin Fung in 1975Οκτ 2026Salt & Tar: Ep.360- Good NewsΟκτ 2026Salt & Tar: Ep.359- Memory LaneΣεπ 2026

Από Salt & Tar — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.