Salt & Tar · vídeo

Qué cubre este vídeo

Fiberglassing the hull of a custom dinghy, named Little Red, requires multiple layers of 6-ounce cloth and epoxy to ensure durability for future cruising.3:48 The project involves deviating from the original plans to overbuild the structure, including adding extra layers to the bottom, transom, and bow to increase abrasion resistance for beach landings.6:07 The process involves cutting the fiberglass at the tape line while the epoxy is still in a pliable, gelled state to achieve clean edges.6:43 To manage the central California coastal marine layer and fog, the crew uses a makeshift tent to protect the curing hull.13:26 After completing the exterior glassing, the next steps include sanding, applying Total Fair epoxy putty to smooth transitions, and priming with an epoxy primer before repeating the fiberglassing process on the interior.10:38 The dinghy is designed to support a sail kit, rowing, or a small outboard motor for use alongside the mothership, Red Aviva, in Mexico.3:26 Overbuilding the hull with extra fiberglass layers provides necessary protection against the rigors of cruising.14:58

Más de Salt & Tar

Meet Victoria - Tour of our William Garden 'Porpoise' built by Robin Fung in 1975oct 2026Salt & Tar: Ep.360- Good Newsoct 2026Salt & Tar: Ep.359- Memory Lanesept 2026Salt & Tar: Ep.358- Sad Newssept 2026

De Salt & Tar — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.