Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind installs hardware for steps on the boat Uwe Eend, addressing the challenge of mounting straight components onto a curved hull surface.▶ 0:00 To ensure a secure fit, he applies epoxy to the screw holes, drives the screws in, and then removes them to coat the threads in epoxy before final installation.▶ 0:37 He marks the orientation of the hardware with an arrow to account for asymmetrical hole spacing.▶ 0:24 Because the hull curvature does not match the flat profile of the hardware, he fills the resulting gaps with epoxy.▶ 0:52 He uses a file to adjust the positioning of the components for a flush fit.▶ 2:32 The process requires multiple stages of drying and adjustment to compensate for the mismatch between the straight hardware and the curved boat structure.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.