Velero Regina · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of the cutter-rigged sailboat Regina departs the marina in La Palma, Spain, for a passage to the island of El Hierro.0:04 During the transit, the boat maintains speeds between 3 and 5 knots in light winds of 5 to 10 knots, primarily sailing on a close reach rather than the forecasted beam reach.12:12 The vessel arrives at the Marina de la Estaca on El Hierro after dark.14:02 The marina features modern infrastructure and available slips, but its remote location 10 kilometers from the town of Valverde necessitates renting a car for local travel.14:59 Regarding sail trim, the crew emphasizes the importance of reefing to maintain efficiency and prevent sail deformation, noting that partially furling headsails damages the fabric.5:55 The Regina utilizes a cutter configuration with a staysail and yankee, allowing the crew to fully unfurl sails or switch to the staysail in higher winds rather than partially furling the yankee.7:00 The mainsail includes three reefs, with the third acting as a storm sail for heavy weather.7:29

Περισσότερα από το Velero Regina

Regina has been soldΣεπ 2026Miss Regina Boat TourΑυγ 2026The newsΑυγ 2026Azores to the Peninsula. What went wrong?Αυγ 2026

Από Velero Regina — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.