Velero Reginavídeo
La Palma - El Hierro
22 de noviembre de 2024 · 17 min · 1K visitas · Canary Islands
Qué cubre este vídeo
The crew of the cutter-rigged sailboat Regina departs the marina in La Palma, Spain, for a passage to the island of El Hierro.0:04 During the transit, the boat maintains speeds between 3 and 5 knots in light winds of 5 to 10 knots, primarily sailing on a close reach rather than the forecasted beam reach.12:12 The vessel arrives at the Marina de la Estaca on El Hierro after dark.14:02 The marina features modern infrastructure and available slips, but its remote location 10 kilometers from the town of Valverde necessitates renting a car for local travel.14:59 Regarding sail trim, the crew emphasizes the importance of reefing to maintain efficiency and prevent sail deformation, noting that partially furling headsails damages the fabric.5:55 The Regina utilizes a cutter configuration with a staysail and yankee, allowing the crew to fully unfurl sails or switch to the staysail in higher winds rather than partially furling the yankee.7:00 The mainsail includes three reefs, with the third acting as a storm sail for heavy weather.7:29
Más de Velero Regina
De Velero Regina — mira el barco del canal, la tripulación y cada vídeo analizado.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.