Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind is constructing a small, shallow-draft boat designed for high-latitude sailing, with a planned 14,000-mile non-stop voyage through the Southern Ocean to New Zealand.▶ 0:19 Current construction focuses on fabricating and reinforcing five structural components using fiberglass, epoxy, and carbon fiber.▶ 1:19 Yrvind is integrating an antenna housing into the mast structure, which requires routing cables and halyards through the assembly.▶ 1:55 During the process, he encountered interference between the halyard exit and the topping lift, necessitating a design modification to bypass the original hole configuration.▶ 4:51 He degreased screws with acetone before securing the carbon fiber attachments with two screws per piece.▶ 3:37 The build process involves iterative sanding, coating with epoxy, and refining component placement to ensure structural strength. Yrvind notes that design challenges often arise during fabrication, requiring on-the-fly adjustments to accommodate navigation lights and rigging lines.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.