Sailing Squib · βίντεο

Τι καλύπτει αυτό το βίντεο

The refit of the pocket catamaran Squib focuses on constructing a new aft bulkhead and door assembly, alongside an electrical system upgrade. To reduce weight, the bulkhead frame is built from 25mm wooden strips with Styrodur insulation inserts.8:37 The structure includes a dedicated section for a new helm seat and a mounting point for a folding table on the port side.9:33 Two 50x47cm safety glass panels, salvaged from an old aquarium, are integrated into the upper bulkhead section.13:13 The builder uses stainless steel wool to clean algae and calcium deposits from the glass before installation.13:30

For the electrical system, four Ecoworthy lithium iron phosphate (LiFePO4) batteries are purchased to replace existing power storage.20:09 Each unit measures approximately 17x26x22cm, requiring a custom-built battery box for installation.18:40 A 20-amp battery charger is also acquired as a backup for shore power, though the vessel relies primarily on 1400 watts of solar capacity.21:48 The bulkhead components are laminated with epoxy and fiberglass matting to ensure structural integrity.22:00 Pre-fitting the frames on the boat before final bonding prevents alignment errors caused by temperature-related material expansion.14:14

Περισσότερα από το Sailing Squib

Sailing Squib May 2026 /2Αυγ 2026Sailing Squib - Contemporary WitnessΙουλ 2026Sailing Squib - May 2026 /1Ιουλ 2026Sailing Squib - We'll take care of the rest on the way - Arrival in Mesolongi/ 33Ιουν 2026

Από Sailing Squib — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.