Sailing Nova Vita · βίντεο

Τι καλύπτει αυτό το βίντεο

To stop a persistent oil leak on a Volvo Penta MD2030 engine, the crew replaces three O-rings located behind the timing cover on the throttle lever assembly.15:02 The repair requires removing the raw water pump, alternator belt, and diesel injector feed pipes to access the housing.4:11 A harmonic puller is necessary to remove the pulley wheel, which is secured by a keyway.6:31 The specific O-ring part numbers used for the replacement are 3580035, 3580040, and 3580047.16:03 After cleaning the mating surfaces, the crew applies Hylamar Blue gasket jointing compound before reassembling the housing.18:48 During the service, the crew also replaces the raw water pump impeller, which showed signs of vane degradation after 12 months of use, and installs new coolant hoses.19:28 The engine is tested for leaks after the reassembly and a full filter change.26:21 Documenting the disassembly process with photographs helps ensure correct reinstallation of the components.26:57

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Sailing Nova Vita

Binnacle electrics repair - WAGO ConnectorsΣεπ 2026MD2030 Saildrive bellows installation on BavariaΣεπ 2026Azores to UK 2026 : Pt 3 : ARRIVAL in PLMYOUTHΑυγ 2026MD2030 Damper plate repairΑυγ 2026

Από Sailing Nova Vita — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.