Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind constructs custom booms for a rain-catching system on his small, shallow-draft boat intended for a 14,000-mile Southern Ocean circumnavigation.▶ 0:07 To reduce weight compared to previous carbon fiber and unicel prototypes, he fabricates the new booms using 9 mm Gabun plywood.▶ 1:11 He laminates four layers of 10x10 cm blocks, using a lathe to apply consistent pressure during the epoxy curing process.▶ 3:00 The design incorporates custom bushings to ensure proper fit and movement, with holes drilled to accommodate expansion when the wood becomes wet.▶ 6:22 Yrvind splits the wooden profiles to create a slot for the sail, inserting 3 mm spacers to compensate for the material removed during the cutting process.▶ 8:46 He increases the dimensions of the plywood box structure to 10 cm in width and height to improve overall rigidity.▶ 9:42 The project emphasizes iterative design, utilizing mock-ups to refine the engineering before final assembly.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.