Sailing Yacht Zora · βίντεο

Τι καλύπτει αυτό το βίντεο

Rhys repairs water-damaged fiberglass and rotten core on Yacht Zora by drilling access holes and excavating the saturated material.4:02 He uses an Allen key mounted in a drill to reach inside the fiberglass skin and remove the decayed core material.4:54 After vacuuming the cavity, he fills the voids with resin to restore structural integrity and seal the area against further water ingress.6:15 The project also involves resealing and bolting hardware using penny washers and nylock nuts to prevent loosening.1:09 He identifies a specific crack as the primary entry point for water that caused the delamination and rot.5:46 The repair process requires cleaning out old sealant, re-drilling holes, and applying epoxy to the affected sections.1:38 Once the core is stabilized and the cracks are sealed, the plan includes moving the vessel into a shed for final painting of the top and bottom sides.2:42

Περισσότερα από το Sailing Yacht Zora

Dodging Ice in GreenlandΙαν 2025Sailing Newfoundland to GreenlandΔεκ 2024Sailing down the West Coast of Spain - Episode 62 - Sailing Yacht ZoraΝοε 2021The Boat WENT UP IN FLAMES .....AGAIN -Episode 58-Sailing Yacht ZoraΑυγ 2021

Από Sailing Yacht Zora — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.