Sailing Yacht Zora · video

Hva denne videoen dekker

Rhys repairs water-damaged fiberglass and rotten core on Yacht Zora by drilling access holes and excavating the saturated material.4:02 He uses an Allen key mounted in a drill to reach inside the fiberglass skin and remove the decayed core material.4:54 After vacuuming the cavity, he fills the voids with resin to restore structural integrity and seal the area against further water ingress.6:15 The project also involves resealing and bolting hardware using penny washers and nylock nuts to prevent loosening.1:09 He identifies a specific crack as the primary entry point for water that caused the delamination and rot.5:46 The repair process requires cleaning out old sealant, re-drilling holes, and applying epoxy to the affected sections.1:38 Once the core is stabilized and the cracks are sealed, the plan includes moving the vessel into a shed for final painting of the top and bottom sides.2:42

Mer fra Sailing Yacht Zora

Dodging Ice in Greenlandjan. 2025Sailing Newfoundland to Greenlanddes. 2024Sailing down the West Coast of Spain - Episode 62 - Sailing Yacht Zoranov. 2021The Boat WENT UP IN FLAMES .....AGAIN -Episode 58-Sailing Yacht Zoraaug. 2021

Fra Sailing Yacht Zora – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.