Living For Sail · βίντεο

Τι καλύπτει αυτό το βίντεο

John, the owner of the 40-foot-plus restoration project *Antidote*, removes rotted plywood core from the boat's bulwarks by drilling into the structure with long auger bits.6:01 He uses a 17-inch, 3/8-inch auger bit to reach the bottom of the 8-inch-deep bulwark pockets, followed by a modified 1/2-inch auger bit with a ground-down tip to clear debris.9:19 The goal is to remove all moisture-damaged wood and replace it with structural foam, such as Kusa or Divinycell, before sealing the area with fiberglass.4:52 To investigate the efficacy of injecting epoxy into saturated decks, he visits a boat scrapyard in Linden, Washington, to harvest core samples from a 40-year-old vessel with a soft, water-logged deck.13:31 He plans to test these samples to determine if epoxy or polyurethane glue provides a legitimate structural repair for delaminated balsa cores.15:37 Removing rotted core material requires specialized long-reach bits and chisels to ensure a clean substrate for new foam installation.

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Living For Sail

This Was Inside The Boat!? — Should I Put It Back?Σεπ 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My BoatΑυγ 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!Ιουλ 2026⛵️ This DIY Sailboat Repair Has To Work... Right?Ιουν 2026

Από Living For Sail — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.