Living For Sail · vídeo

O que este vídeo aborda

John, the owner of the 40-foot-plus restoration project *Antidote*, removes rotted plywood core from the boat's bulwarks by drilling into the structure with long auger bits.6:01 He uses a 17-inch, 3/8-inch auger bit to reach the bottom of the 8-inch-deep bulwark pockets, followed by a modified 1/2-inch auger bit with a ground-down tip to clear debris.9:19 The goal is to remove all moisture-damaged wood and replace it with structural foam, such as Kusa or Divinycell, before sealing the area with fiberglass.4:52 To investigate the efficacy of injecting epoxy into saturated decks, he visits a boat scrapyard in Linden, Washington, to harvest core samples from a 40-year-old vessel with a soft, water-logged deck.13:31 He plans to test these samples to determine if epoxy or polyurethane glue provides a legitimate structural repair for delaminated balsa cores.15:37 Removing rotted core material requires specialized long-reach bits and chisels to ensure a clean substrate for new foam installation.

Barcos neste vídeo

Mais de Living For Sail

This Was Inside The Boat!? — Should I Put It Back?09/2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boat08/2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!07/2026⛵️ This DIY Sailboat Repair Has To Work... Right?06/2026

De Living For Sail — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.