Project Brupeg · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of the 1984-built trawler *Brupeg* performs a mechanical overhaul on a vintage two-stroke outboard motor while anchored at Thursday Island. After reassembling the lower unit, the team identifies a missing key for the water pump impeller, which they fabricate from a rivet gun spanner to ensure the shaft drives the pump.1:20 During sea trials, the engine exhibits a high-pitched whine, which the crew mitigates by increasing the oil-to-fuel pre-mix ratio to lubricate the bearings.13:59 A subsequent fuel leak from the carburetor float bowl is traced to a misaligned, expanded rubber gasket; the crew replaces the seal and verifies float movement to stop the flooding.21:55 Further inspection reveals loose mounting screws on the engine cover, which are secured with medium-strength Loctite to eliminate rattling.18:27 The project prioritizes recycling the older motor over purchasing a new four-stroke unit to minimize costs for the vessel's ongoing restoration.20:02

Περισσότερα από το Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463Οκτ 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462Σεπ 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461Σεπ 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460Σεπ 2026

Από Project Brupeg — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.