Project Brupeg · video

Cosa tratta questo video

The crew of the 1984-built trawler *Brupeg* performs a mechanical overhaul on a vintage two-stroke outboard motor while anchored at Thursday Island. After reassembling the lower unit, the team identifies a missing key for the water pump impeller, which they fabricate from a rivet gun spanner to ensure the shaft drives the pump.1:20 During sea trials, the engine exhibits a high-pitched whine, which the crew mitigates by increasing the oil-to-fuel pre-mix ratio to lubricate the bearings.13:59 A subsequent fuel leak from the carburetor float bowl is traced to a misaligned, expanded rubber gasket; the crew replaces the seal and verifies float movement to stop the flooding.21:55 Further inspection reveals loose mounting screws on the engine cover, which are secured with medium-strength Loctite to eliminate rattling.18:27 The project prioritizes recycling the older motor over purchasing a new four-stroke unit to minimize costs for the vessel's ongoing restoration.20:02

Altro da Project Brupeg

Was the outboard rebuild worth it and Brupeg has developed a worrying noise... Project Brupeg Ep.456ago 2026Three Builds, One Croc Sanctuary: Boat Life on Brupeg - Project Brupeg Ep.455ago 2026Brupeg's 1st Drone, Green Island & Boatwork - Project Brupeg Ep.454lug 2026Good Mates & Boat Maintenance - Project Brupeg Ep.453lug 2026

Da Project Brupeg — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.