Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind is constructing a small, shallow-draft vessel designed for a 14,000-mile nonstop voyage through the Southern Ocean, passing south of Africa and Australia toward New Zealand.▶ 0:17 During the build process, he identifies structural failures caused by using components for unintended purposes. A handhold rail cracked after he used it as a lifting point to hoist the boat.▶ 0:56 Additionally, an anchor rope guide bent under the stress of securing a chain while the boat sat on its side.▶ 1:16 To rectify these weaknesses, Yrvind reinforces the components by drilling 12-millimeter holes and lashing the fittings with rope secured by epoxy.▶ 2:13 These modifications increase the structural integrity of the affected areas by approximately four times their original strength.▶ 2:51 The project serves as a practical lesson in over-engineering hardware to withstand the unpredictable loads encountered during long-distance sailing.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.