Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind fabricates a carbon-tube handhold on his small cruiser Uwe Wind, cutting two holes through the cabin structure to route the tube from outside down into the interior as a grip for climbing out of the living quarters.▶ 1:11 He bonds the tube in place with fumed silica and epoxy, lets it cure overnight, then trims it flush with an oscillating tool.▶ 1:28 A layer of Divinycell foam is added inside to limit condensation, and the whole assembly is glassed over with fiberglass and thickened epoxy — both at the top and bottom exits.▶ 1:58 The result is strong enough to serve as a lifeline attachment point.▶ 2:52 He acknowledges the construction is more involved than a simple handhold requires, but accepts the overbuilt result.▶ 2:47 A neighbor named Johan also supplies him with free-range eggs — various colors and sizes — ahead of Easter.▶ 0:00 The practical takeaway: routing a carbon tube through the hull and laminating it with fiberglass and thickened epoxy produces a handhold strong enough to double as a safety attachment point.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.