Tips from a Shipwright · βίντεο

Τι καλύπτει αυτό το βίντεο

Louis Sauzedde continues construction on a TotalBoat work skiff, focusing on fastening bottom planks to runners and installing chamfered guards.8:35 To secure the bottom planks, he drives square-cut nails using a pin maul, alternating between nails and boards to prevent the wood from popping up and to ensure a tight fit against the runners.3:24 He emphasizes keeping the hammer handle low to the floor to avoid bending the nails and uses the hammer’s weight to drive the heads flush below the surface without dimpling the wood.3:56 For the guards, he cuts a 45-degree chamfer along the bottom edge using a circular saw, clamping the wood to sawhorses to prevent sliding during the cut.9:01 The project remains in progress, with upcoming tasks including installing cap rails, mounting a knee in front of the outboard motor, and bolting the transom corner posts.0:50 The builder plans to finish the guards and rails with oil to highlight the wood grain.1:35

Περισσότερα από το Tips from a Shipwright

Building Orca - Ep. 23: Mold FIVEΜαρ 2026Progressive BevelingΦεβ 20261958 Harley Davidson Panhead Motorcycle - For SaleΦεβ 2026Building Orca - Ep. 22: Lofting Pt. 3 - Full Scale LinesΙαν 2026

Από Tips from a Shipwright — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.