Project Brupeg · βίντεο

Τι καλύπτει αυτό το βίντεο

Fabrication of the expedition trawler’s wings requires precise alignment of 16mm steel hinge plates to ensure structural integrity during operation.5:14 To distribute the load from the hinges into the wing’s internal framework, the process involves welding internal doublers and gussets before capping the wing ends.0:38 Because the 16mm steel plate requires bending to match the wing profile, alignment is achieved by using a 2-inch 316 stainless steel pipe as a guide to ensure the hinge holes remain true.8:13 The fabrication process includes tack-welding the plates, sandblasting the joints to ensure a clean surface for final welding, and planning for diagonal bracing to mitigate tension on the hinge welds.10:15 The design incorporates a gusset between the hinge plate and the wing’s internal strong-back to transfer stress away from the primary welds and into the center of the wing structure.15:07

Περισσότερα από το Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463Οκτ 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462Σεπ 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461Σεπ 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460Σεπ 2026

Από Project Brupeg — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.