Project Brupeg · video

Hva denne videoen dekker

Fabrication of the expedition trawler’s wings requires precise alignment of 16mm steel hinge plates to ensure structural integrity during operation.5:14 To distribute the load from the hinges into the wing’s internal framework, the process involves welding internal doublers and gussets before capping the wing ends.0:38 Because the 16mm steel plate requires bending to match the wing profile, alignment is achieved by using a 2-inch 316 stainless steel pipe as a guide to ensure the hinge holes remain true.8:13 The fabrication process includes tack-welding the plates, sandblasting the joints to ensure a clean surface for final welding, and planning for diagonal bracing to mitigate tension on the hinge welds.10:15 The design incorporates a gusset between the hinge plate and the wing’s internal strong-back to transfer stress away from the primary welds and into the center of the wing structure.15:07

Mer fra Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463okt. 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462sep. 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461sep. 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460sep. 2026

Fra Project Brupeg – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.