Land Rats on a Bartered Sailboat · vídeo

Qué cubre este vídeo

The crew installs the rudder, tiller, and prop shaft on their boat in preparation for a trip to the coast.0:23 They coat the rudder shaft tube with epoxy and install top and bottom bushings while the epoxy remains wet to ensure a secure fit.1:02 After polishing the main drive shaft on a lathe to remove scratches and protect the new seal, they insert the shaft through the hull and apply marine grease.4:09 The initial rudder installation proves too tight to turn, requiring the crew to use a flapper disc to enlarge the bushing holes in small increments until the rudder moves freely by hand.8:23 They address excessive play in the tiller fitting by inserting copper shim stock, though they plan to have the component welded and machined for a tighter final fit.11:15 The project concludes with the rudder secured in place and the hull opening sealed.12:18

Más de Land Rats on a Bartered Sailboat

Sailing across country borders, International Sailing, South Africa to Namibia | Land Rats | EP70jul 2022Exploring Richards bay and sailing back to Durban | Land Rats | EP60oct 2021Offshore Sailing, first passage on our Steel boat, Durban to Richards Bay | Land Rats | EP59oct 2021Out Sailingsept 2021

De Land Rats on a Bartered Sailboat — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.