Sailing With Phoenix | Oliver · vídeo

Qué cubre este vídeo

Oliver replaces his boat's propeller shaft coupler, installs a new feathering propeller, and upgrades to a dripless shaft seal.▶ 1:23 After removing the old, corroded coupler and drilling out a snapped bolt, he installs a new coupler and a shaft saver to protect the transmission.▶ 2:52 He replaces the traditional packing gland with a dripless seal, routing the required air bleed hose as high as possible to prevent water ingress.▶ 10:28 The installation requires a two-person effort to seat the shaft and align the set screws, which are secured with Loctite.▶ 6:50 Finally, he mounts the new feathering propeller, greasing the internal mechanism to ensure smooth folding.▶ 13:37 The feathering design aims to reduce drag while sailing, which the owner estimates could improve passage times by up to two weeks on long voyages.▶ 14:39 The installation is completed while the boat is on the hard, with final testing planned for after the vessel is relaunched.▶ 10:15

Más de Sailing With Phoenix | Oliver

I've been doing a bad job...may 2026Installing A High Output Alternator ⚡️abr 2026Got a New Fuel Tank and Almost Killed My Vanabr 2026Phoenix Do Mar Is Bornmar 2026

De Sailing With Phoenix | Oliver — mira el barco del canal, la tripulación y cada vídeo analizado.