See me at sea · vídeo

Qué cubre este vídeo

Nova Loman constructs a custom fiberglass hardtop for her sailboat using a DIY mold made from thin boards and plastic piping.0:08 To provide structural integrity, she integrates plastic pipes along the arch and front sections, which also serve as splash rails and non-slip foot supports.5:29 The fabrication process involves layering fiberglass mat and polyester resin, followed by extensive sanding and spackling to smooth the surface.9:49 Because the work occurs in late autumn, Loman uses a 3-kilowatt heater to maintain temperatures sufficient for the resin to cure.16:51 She attaches the finished structure to the boat deck by sanding away the existing gel coat and glassing the hardtop directly to the vessel.11:54 Due to cold weather and time constraints, the final painting and window installation are deferred until spring.16:13 The project prioritizes functional utility over cosmetic finish.10:20

Más de See me at sea

My boat and I take a vacation on the standing mast routeoct 2026I Thought I Was Going to Lose My Boat - The Storyoct 2026Running aground + GPS interference in the North seasept 2026Transiting the Kiel Canal with an electric motorsept 2026

De See me at sea — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.