Salt & Tar · vídeo

Qué cubre este vídeo

Garrett and Ruth are performing a major hull and cabin refit on their 35-foot boat, *Red Aviva*, while hauled out in a boatyard.1:54 The project focuses on structural reinforcement and waterproofing, specifically fiberglassing the cabin-to-deck joints and refastening the hull.3:47 Garrett uses a rotary sander to remove old material and prepare the hull for new fasteners, noting that the tool significantly reduces the time required for scraping.1:05 To fill the numerous holes left by the refastening process, the pair uses a baggie to distribute epoxy efficiently.15:03 Ruth reinforces the cabin seams with six-inch biaxial fiberglass tape, experimenting with applying the mat side down to improve the lay-down, despite previous debates about fairing ease.23:00 They also employ traditional boat-building techniques, such as using cotton washers soaked in tar around fasteners to prevent water ingress before the wood swells.20:53 The crew aims to complete the port side and move to the starboard side before splashing the boat in approximately two to three weeks.15:17

Más de Salt & Tar

Salt & Tar: Ep.361- IN-THE-WATER Surveyoct 2026Meet Victoria - Tour of our William Garden 'Porpoise' built by Robin Fung in 1975oct 2026Salt & Tar: Ep.360- Good Newsoct 2026Salt & Tar: Ep.359- Memory Lanesept 2026

De Salt & Tar — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.