How to Wire 12V Dimmers and 2-Way Dimmers - Branch Circuits | Ep 9/10
25 de mayo de 2025 · 7 min · 11K visitas
Qué cubre este vídeo
Wiring a 12V DC dimmer in a branch circuit requires three connections: positive input from the fuse block (red), positive output to the lighting circuit (black), and a shared negative (white) joined at a lever nut to both the fuse block negative and the light negative.1:22 Nate demonstrates this on a Blue Sea Blade Fuse Block, with the Victron Lynx distributor mentioned as the upstream distribution point.0:35 A single dimmer wired this way works cleanly, allowing full range from off to full brightness.2:51 Two-way dimmer circuits — wiring two dimmers in series so lights can be controlled from multiple locations, a common request for camper vans — do not work.3:11 Nate wires two dimmers in series and shows the result: the lights flash erratically because each dimmer independently chops the power signal with no awareness of the other's position, producing interference rather than smooth dimming.4:42 The only reliable solution for multi-point dimming is a software-based system; Nate identifies the RedArc TVMS Rogue as one such device, capable of controlling on/off and dimming from multiple switches, a wall touchscreen, and a phone app.6:43
Más de EXPLORIST life Mobile Marine & Off-Grid Electrical
De EXPLORIST life Mobile Marine & Off-Grid Electrical — mira el barco del canal, la tripulación y cada vídeo analizado.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.