Sailing Uma · vídeo

Qué cubre este vídeo

Dan and Kika apply three coats of spray-on cork insulation to the interior cabin ceiling of their boat to manage condensation and improve thermal insulation.▶ 14:00 Before spraying, they epoxy plastic panel clips across the ceiling in a grid pattern to facilitate the future installation of lightweight, recycled carbon fiber sandwich panels.▶ 0:59 To ensure complete coverage during the multi-coat process, they use a contrasting color for the second coat and apply spray paint as a guide for the final layer.▶ 15:06 The application process requires extensive masking of port lights, hatches, and cabin surfaces to prevent overspray.▶ 6:26 The finished cork layer measures approximately 4 to 5 millimeters thick and provides noticeable acoustic dampening within the cabin.▶ 20:34 The pair plans to cover the main ceiling sections with panels while considering fabric or vinyl for irregular side areas where the cork texture is difficult to clean.▶ 24:15

Más de Sailing Uma

Uma is Ready to Launch! (But there's a catch) | Step 489jun 2026How Many Sails Does it Take To Replace a Diesel Engine? | Step 488may 2026Turning Our Powerboat Back Into a Sailboat | Step 487may 2026We Cut our Mast in Half | Step 486may 2026

De Sailing Uma — mira el barco del canal, la tripulación y cada vídeo analizado.