BoatHowTo · vídeo

Qué cubre este vídeo

Jan Attenstedt and Nigel Calder explain that using an anchor windlass as a load tester is ineffective for determining the true capacity of marine house batteries.▶ 0:18 Automotive high-load testers also fail to provide accurate capacity readings for deep-cycle house banks.▶ 0:49 The only reliable method involves fully charging the battery, discharging it at a controlled rate until it reaches 10.5 volts, and measuring the total time elapsed to calculate the actual amp-hour capacity.▶ 1:00 Because this process stresses the battery, it should be performed sparingly, such as before a long offshore cruise or immediately after purchasing new batteries to verify they meet manufacturer specifications.▶ 1:28 Batteries that sit in storage for extended periods, particularly in hot climates, may suffer from sulfation and reduced capacity before they are even installed.▶ 2:19 Testing new batteries upon purchase ensures they are not defective or damaged from improper shelf storage.▶ 1:43

Más de BoatHowTo

SODIUM ION Batteries - the Future of Boating or Marketing Hype?| Ask The Expert with NIGEL CALDERjul 2026Are Household POWERSTATIONS a viable Solution ON BOATS?? | Ask The Expert with NIGEL CALDERjul 2026ONE SWITCH for TWO PUMPS?? (Pontoon Boat Setup) | Ask The Expert with NIGEL CALDERjul 2026OIL LEAKS at the Crankshaft... | Ask The Expert with NIGEL CALDERjul 2026

De BoatHowTo — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.