Sailing Britaly · vídeo

Qué cubre este vídeo

Replacing corroded brass seacocks and skin fittings on a 1992 Bavaria 350 requires removing old, brittle components that have suffered from de-zincification.0:05 To extract the old fittings, an angle grinder with a metal-cutting disc removes the flange from the outside, allowing the assembly to be pulled through the hull.5:29 The installation uses DZR brass ball valves and stainless steel hose tails, sealed with Loctite 572 thread sealant.12:29 To prevent the skin fitting from rotating while tightening the internal nut, an 8mm or 17mm combination spanner can be inserted into the internal lugs to hold the fitting steady.13:57 The project also involves rerouting galley sink drains through a single T-piece to free up a seacock for an auxiliary engine cooling water intake.2:53 Proper installation requires ensuring hoses maintain a high loop above the waterline to prevent siphoning.18:35 Using DZR brass or bronze components prevents the structural failure common in standard brass fittings below the waterline.0:22

Barcos en este vídeo

Más de Sailing Britaly

Goodbye Belgium: Hello FRANCE! ⛵Sailing Britaly⛵feb 2026Belgium's Waterways Are UNDERRATED! ⛵ Sailing Britaly ⛵ene 2026Boat Life on The Inland Waterways | ⛵ Sailing Britaly ⛵oct 2025Hitching a Ride on a GIANT Elevator... For BOATS! ⛵ (Ronquieres Inclined Plane)sept 2025

De Sailing Britaly — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.