Project Brupeg · vídeo

Qué cubre este vídeo

Damien fabricates a custom outboard motor storage rack for the transom of the 10-year-rebuild fishing trawler *Brupeg*.0:03 He constructs the rack using pine timber for the mounting board and stainless steel brackets welded directly to the steel hull.1:44 To ensure a clean finish, he applies a two-part epoxy primer using a "bow wave" painting technique, utilizing masking tape to catch excess paint runs.2:28 The crew positions the rack horizontally to allow for easier outboard servicing, such as gearbox oil changes, over the deck.8:41 Before departing for a fuel stop, the crew performs a standard pre-departure check of engine oil, hydraulics, coolant, and steering systems.9:04 While navigating to the fuel dock, the vessel encounters a bulk carrier and coordinates a port-to-port pass to maintain safety.10:01 At the dock, the crew takes on approximately 558 liters of fuel.12:30 Because the vessel lacks steering authority in reverse, the operator maneuvers in tight quarters by alternating short bursts of forward gear with neutral to control the heading.13:32

Más de Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463oct 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462sept 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461sept 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460sept 2026

De Project Brupeg — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.