Sailing Catalpa · vídeo

Qué cubre este vídeo

The crew of the sailboat Catalpa removes their masts and all standing rigging to facilitate a complete replacement of the rig.Watch Working with a professional rigger, they measure each wire and pin size for custom fabrication by Hemmer Marine.0:28 The existing rigging shows signs of "barber pulling," where internal corrosion weakens the cables, and the use of mismatched imperial and metric hardware suggests inconsistent maintenance over time.2:06

The crew also removes all chain plates for inspection.5:40 Despite appearing sound from the deck, the plates exhibit significant crevice corrosion, swelling, and structural cracking once removed from the hull.13:51 The crew decides to replace all chain plates through Schaefer Marine rather than attempting repairs.15:17 They also inspect the aluminum mast, which shows extensive paint bubbling and corrosion around stainless steel fittings and penetrations.16:14 They plan to remove all mast hardware to assess the extent of the damage before deciding between spot-patching or a full sandblast and repaint.17:15 The crew uses folding electric bikes for land-based logistics and provisioning during the refit.4:56

Más de Sailing Catalpa

arriving to the most remote atolls on earth...the Tuamotussept 2026they weren't expecting thissept 2026one of the most remote islands on the planetsept 202629 days sailing Panama to French Polynesia the whole passageago 2026

De Sailing Catalpa — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.