Sailing Yabá · vídeo

Qué cubre este vídeo

The refit of the wooden sailboat Yabá focuses on structural reinforcement of the stern and the installation of new through-hull fittings for a greywater system. To protect the stern post, propeller, and stern tube from potential damage, welders install custom-shaped steel plates over the hull, securing them with SikaFlex and alternating weld spots to prevent heat damage to the wood.4:59 The crew also installs two new through-hull fittings for sink drainage.15:42 Because the hull planks are nine centimeters thick, the owner modifies standard through-hulls by welding custom stainless steel tubing extensions to the threads.8:59 Installation requires chiseling away portions of the internal beam shelf to accommodate hose connectors and ensure proper tightening.18:34 The owner uses a two-stage tightening method, allowing the sealant to cure before final torque to create a rubber-like gasket seal.20:26 The project concludes with the hull plates being primed and prepared for anode attachment.7:19

Más de Sailing Yabá

Is a Huge Crew Always Better? (Bittersweet Voyage Surrounded by Whales) — Sailing Yabáoct 2026Yabá gets Brand New Sails & Set Sail Immediately!— Sailing Yabáoct 2026Everything Has to be Perfect: Preparing the Rig for Brand New Sails — Sailing Yabásept 2026Our Sails Ripped on Their Last Journey Before a Massive Upgrade! — Sailing Yabásept 2026

De Sailing Yabá — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.