El Viaje de Bohemia · vídeo

Qué cubre este vídeo

Tomas and Agus install a Remoran Wave 3 hydrogenerator on their Bavaria sailboat to increase electrical autonomy during offshore passages.▶ 0:53 The installation requires mounting the turbine bracket to the transom, which necessitates custom wooden spacers to clear the hull’s molded lip.▶ 2:21 After drilling the fiberglass, the crew seals the mounting holes with Butyl Tape to prevent water ingress.▶ 4:25 The electrical installation involves routing a 20mm power cable from the stern to a charge controller, which is mounted in the aft lazarette, and installing a 40-amp fuse on the positive line before connecting to the battery bank.▶ 7:19 The system integrates with existing solar and alternator charging setups by feeding into a common bus bar.▶ 8:53 During sea trials, the unit produces 5 to 6 amps at 4 knots of boat speed and up to 17 amps at 7 knots.▶ 12:24 The Remoran mobile app provides real-time data on current, voltage, and turbine RPM.▶ 13:11 The hydrogenerator operates silently, providing a consistent power source for the autopilot, refrigeration, and navigation electronics while underway.▶ 13:09

Más de El Viaje de Bohemia

This is how we’re going to experience the WORLD CUP from our SAILBOAT 🇦🇷 [Ep.114] The Journey of Bohemiajul 2026The SECRET WEAPON of our SAILBOAT... [Ep. 113] The Bohemia Journeyjul 2026This could SAVE our BOAT | ShakeSure Galvanized anchor chain [Ep.112] El Viaje de Bohemiajun 20263 YEARS WITHOUT SEEING EACH OTHER… Reunion with NOMADAS DEL MAR [Ep.111] The Journey of Bohemiajun 2026

De El Viaje de Bohemia — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.