Project Brupeg · vídeo

Qué cubre este vídeo

Fabricating a custom mounting system for a K4 Karcher water blaster requires horizontal orientation to ensure proper pump function and plumbing alignment.9:36 The installation involves constructing stainless steel brackets from 25x3mm and 40x3mm flat bar, secured with 12mm threaded rod and rubber grommets to dampen vibration and noise.10:47 Because the K4 Karcher motor is water-cooled, the mount design prioritizes airflow by removing the original plastic housing.9:11 To protect the watermaker membrane from chlorine damage, the system incorporates a 20-liter food-grade jerry can as a dedicated fresh water flush tank.21:46 This tank allows the crew to store chlorinated town water in the vessel's 5,300-liter main tanks while using the watermaker to produce and store un-chlorinated water for membrane maintenance.22:03 The watermaker serves as a top-up system rather than a primary supply, extending the vessel's range by allowing for months of operation between shore-side water stops.23:00

Más de Project Brupeg

Was the outboard rebuild worth it and Brupeg has developed a worrying noise... Project Brupeg Ep.456ago 2026Three Builds, One Croc Sanctuary: Boat Life on Brupeg - Project Brupeg Ep.455ago 2026Brupeg's 1st Drone, Green Island & Boatwork - Project Brupeg Ep.454jul 2026Good Mates & Boat Maintenance - Project Brupeg Ep.453jul 2026

De Project Brupeg — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.