EXPLORIST life Mobile Marine & Off-Grid Electrical · vídeo

Qué cubre este vídeo

Installing two Victron Orion DC-to-DC chargers in parallel doubles the charging current from a vehicle alternator to a house battery bank.0:11 To manage limited space, mount the chargers on a 3/4-inch plywood backer board, stacking one unit above the other using a custom-fabricated metal bracket.0:39 Ensure the remote jumper plug is installed in each Orion, as the units will not function without it.1:15 Use 2-gauge wire for the main connections between the start battery and the Lynx distributor, incorporating MRBF fuse holders on both the input and output sides.2:31 For a 2021 Ford Transit, connect the negative wire to the starting battery terminal stud and the positive wire to the 175-amp CCP connection on the seat pedestal.8:01 Configure the system using the Victron Connect app, updating firmware and syncing settings across both chargers.8:51 Set the Victron SmartShunt as a DC energy meter to monitor alternator input through the Cerbo GX and Touch 70 display.9:21

Más de EXPLORIST life Mobile Marine & Off-Grid Electrical

Battery Monitor Troubleshooting Tips - Battery Monitoring Playlist | Ep: 3/3dic 2025Bluetooth vs Wired Battery Monitoring | Battery Monitoring Playlist | Ep: 2/3dic 2025How to Wire a REDARC BCDC Alpha 100 R (Step-by-Step Install Guide)dic 2025Upgrading a Living Quarters Horse Trailer With Lithium Power! (400W Solar + SOK Battery Install)nov 2025

De EXPLORIST life Mobile Marine & Off-Grid Electrical — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.