Ale & Max - Y2K Sailing Adventure · vídeo

Qué cubre este vídeo

The crew prepares for local cruising in Fiji by performing maintenance tasks at Musket Cove, Mamanuca Islands. After arriving, they address a Yanmar engine impeller issue caused by an incorrect part number; the replacement impeller had nine blades instead of the required twelve.4:24 They also test the watermaker, which produces approximately 205 liters per hour at 60 bar of pressure with a salt content reading of 125.8:29 The electronic compass fails, requiring the crew to disassemble the aft cabin to replace the sensor and route new cabling to the autopilot.11:30 Despite the repairs, the crew successfully anchors at buoy number seven near the reef.9:29 They plan to rest before exploring the Mamanuca Islands and note the current lack of seasonal traffic from Australia and New Zealand.13:42

Barcos en este vídeo

Más de Ale & Max - Y2K Sailing Adventure

85-Mile NON-STOP Passage: Bow-Riding Dolphins, Cargo Ships & a Marina Mystery | Ep.15-2026oct 2026Fraser Island by SAILBOAT: Calculating Tides to NOT Run Aground | Ep.14-2026sept 2026Back to the OCEAN: 60 Miles Sailing among Whales & Shark Nets (Australia) | Ep.13-2026sept 2026WE’RE OFF AGAIN! Course for INDONESIA: Here’s how to come ABOARD with ussept 2026

De Ale & Max - Y2K Sailing Adventure — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.