BoatworksToday · vídeo

Qué cubre este vídeo

Repairing cosmetic gelcoat chips on a 1987 Catalina 34 requires a systematic approach to surface preparation, material application, and blending.0:35 Before addressing specific nicks, clean the surrounding area with acetone or a de-waxer and remove oxidation using a rotary buffer with a wool compounding pad and a high-quality cutting compound like Total Buff.5:21 For the chips themselves, sand only the damaged area and jagged edges with 120-grit paper to create shallow grooves for the new material.6:40 Apply non-waxed gelcoat in thin, multiple layers using a small applicator like a tongue depressor, allowing 30 to 40 minutes between coats.13:34 Seal the final layer with PVA to ensure a complete cure, then wet sand the area using 600, 800, 1200, and 1500-grit paper until flush.18:01 Finish by buffing the area to match the surrounding luster and applying a protective coat of wax.20:31 Proper preparation and thin, layered application minimize the visibility of the repair and prevent unsightly halos.

Barcos en este vídeo

Más de BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!oct 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!sept 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)sept 2026Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026

De BoatworksToday — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.