Sailing Catalpa · vídeo

Qué cubre este vídeo

Catalpa, an Australian family's sailboat, is in Panama completing final preparations for a Pacific Ocean crossing.▶ 0:44 Lee repairs a badly worn pivot point on an unspecified fitting — a previous owner had substituted threaded rod for a proper pin, elongating the hole — by pressing in three bronze bushes and fitting an oversized bolt, restoring a smooth bearing surface.▶ 2:35 The dinghy moves from the davits to the deck, where Lee builds a plywood cradle fiberglassed and coated with Total Boat Epoxy to secure it for the passage, with enough clearance to keep a forward hatch open for ventilation during the estimated month at sea.▶ 5:45 A leaking hatch in crew member Taj's cabin, sealed with silicone by a previous owner, gets resealed with two layers of butyl tape and passes a storm test.▶ 7:43 For provisioning, a Bougie RV CRD2 43-quart dual-zone freezer with a built-in LiFePO4 battery (28-hour runtime) goes aboard loaded with roughly 20 kg of beef.▶ 10:15 To handle surplus solar from 2,400 watts of Renogy shadow flux panels that fill the existing 800 Ah lithium bank by midday, Lee adds a Renogy 300 Ah lithium battery charged via a 30-amp DC-to-DC charger, monitored by a Victron shunt, bringing total storage to 1,100 Ah.▶ 11:27 The crew also secured a life raft before departure.▶ 1:08

Más de Sailing Catalpa

Installing AIS & VHF Before Our Pacific Crossing Episode 496jun 2026Preparing our dinghy for remote adventures in the pacific Episode 495jun 2026Save $$$ Servicing Your Own 15HP Mercury Outboard (4-Stroke) Episode 494jun 2026Time for a change of scenery Episode 493may 2026

De Sailing Catalpa — mira el barco del canal, la tripulación y cada vídeo analizado.