Sailing Uma · vídeo

Qué cubre este vídeo

The crew of the 45-ft boat *Uma* fabricates custom oak cabinetry components for the vessel’s V-berth by milling rough-cut lumber with a thickness planer.1:24 To ensure structural integrity and a clean finish, the team processes raw oak slabs into precise 25mm, 20mm, and 12mm square dimensions.6:46 They use a track saw to break down large, warped slabs before running the pieces through the planer to achieve uniform thickness and square edges.5:57 This method allows the crew to create custom trim and structural supports that are stronger and more cost-effective than pre-finished lumber.2:28 The team installs these oak stringers and stretchers using a combination of epoxy and screws to prevent future squeaking and structural failure.16:18 After securing the V-berth platform, they plan to install access hatches and secondary water tanks in the forward storage area.18:56 Milling raw hardwood provides a precise, high-quality finish for interior cabinetry while significantly reducing material costs compared to purchasing pre-dimensioned stock.6:55

Más de Sailing Uma

We Ditched Our Steering Wheel (And Built Something Better) | Step 496sept 2026We're Finally Setting Sail Again!sept 20264 Hours to Rig Solar for an 8-Month Solo Circumnavigationsept 2026Solar Sponsor Backed Out Before Sailing Around the World !sept 2026

De Sailing Uma — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.