VOILIER ODIN · vídeo

Qué cubre este vídeo

A boat owner prepares a newly installed Beta Marine engine for its initial startup by filling the cooling system with 8 liters of water and the crankcase with 6.5 liters of 15W40 oil.3:43 To protect the primary fuel system from debris in the tank, a secondary 100-micron pre-filter is installed ahead of the main fuel filter.6:10 The owner also adds 0.6 liters of gear oil to the transmission.7:32 A professional technician from Beta Marine inspects the installation, including the engine alignment and the shaft coupling, before successfully starting the engine.15:16 The engine runs for 20 minutes to circulate fluids and purge air from the cooling lines.15:45 The pre-filter successfully traps small rust particles during this initial run, confirming the utility of the extra filtration stage.15:40 The owner notes that the fuel gauge indicates 50 liters when the tank is at one-quarter capacity, revealing that the bottom portion of the keel tank remains undetected by the float sensor.14:20

Más de VOILIER ODIN

Sailing under asymmetric spinnaker with a Sun Odysseyago 2026TOP NAVIGATION - WORTH REPEATING WITHOUT HESITATIONago 2026WHY I'M MOVING BACK TO FRANCEjul 2026THIS IS ALSO WHAT BOAT LIFE IS LIKEjun 2026

De VOILIER ODIN — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.