Sailing Uma · vídeo

Qué cubre este vídeo

Kika and Dan reinforce and waterproof the cockpit locker lids on their boat to protect new battery installations and electronics.▶ 0:29 Kika sands the lids, fills screw holes with thickened epoxy, and bonds foam inserts to the underside to eliminate structural flex.▶ 1:07 After sanding the cured foam, she applies fiberglass cloth and resin to stiffen the lids before priming and painting the surfaces.▶ 5:35 Dan installs the completed lids using temporary hinges to seal the cockpit lockers against rain while awaiting final non-skid application.▶ 13:09 The team plans to add perimeter foam sealant and mechanical latches to ensure the lockers remain watertight during heavy seas.▶ 15:04 These modifications successfully eliminate lid flex and prevent water ingress into the cockpit lockers.▶ 15:08

Más de Sailing Uma

Uma is Ready to Launch! (But there's a catch) | Step 489jun 2026How Many Sails Does it Take To Replace a Diesel Engine? | Step 488may 2026Turning Our Powerboat Back Into a Sailboat | Step 487may 2026We Cut our Mast in Half | Step 486may 2026

De Sailing Uma — mira el barco del canal, la tripulación y cada vídeo analizado.