XTRIP SAILING · vídeo

Qué cubre este vídeo

To fabricate a custom mooring line, splice a 30–35 cm eye into 18 mm three-strand rope.0:42 For a 12-meter boat, 15-meter lines provide sufficient length for tidal harbors with significant water-level fluctuations, while 25-meter lines offer necessary stretch and reach for distant cleats or heavy swell.1:16 To measure, use the distance from thumb to shoulder as a reliable one-meter gauge.2:06 Secure the rope ends with tape before opening the strands to prevent fraying.4:58 Work the strands against the lay of the rope, ensuring each strand passes over one and under one in a consistent pattern.9:53 Complete at least five full tucks for structural integrity, then perform additional tapered tucks to create a smooth, conical transition that prevents the line from snagging on cleats or fairleads.10:51 Finally, cut the excess, heat the ends with a butane torch to fuse the synthetic fibers, and press the molten material into a rounded finish.16:06 This method eliminates the need for traditional whipping, which often wears prematurely on high-use lines.

Más de XTRIP SAILING

Solo across the Atlantic to Iceland⛵️Xtrip Sailing Ep.239ago 2026Chaos on the water😳 Sailing in the North Atlanticjul 2026Between Wind, Rain, and Currents Faroe Islands🇫🇴XTrip-Sailing⛵️jun 2026I wish there would be a bang and I'd be there - choppy crossing to the Faroe Islands⛵️XTrip Sailingjun 2026

De XTRIP SAILING — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.