A Boat in the Woods · vídeo

Qué cubre este vídeo

Joshua removes teak trim and fittings from the deckhouse of his wooden boat to address cracked plywood siding.1:27 He uses a Forstner bit to drill out epoxied teak bungs, allowing access to the underlying bronze screws.Watch After removing the trim, he identifies the original bedding compound as likely Dolphinite, which preserved the teak underneath.1:44 He struggles to remove the porthole bezel rings, initially attempting to cut the hardened bedding compound with a putty knife and heat before deciding to use a custom-made steel pin wrench for better leverage.21:25 To remove the plywood cabin top, he uses a belt sander to locate screw heads, then chisels away the surrounding epoxy.18:31 He backs out the screws using a brace bit for torque control followed by a cordless drill.23:17 Despite his efforts, the plywood remains bonded to the tongue-and-groove decking by epoxy.27:17

Más de A Boat in the Woods

Hurricane Ties, Bracing, Turning the Truck into Scaffolding - No. 46ago 2026Framing the Roof of My Boat Shed with My Improvised Crane Truck - No. 45ago 2026I Built My Boatshed's Roof on the Ground… Now How Do I Lift It? - No. 44ago 2026Huge Progress on the Boat Shed - No. 43ago 2026

De A Boat in the Woods — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.