RAN Sailing · vídeo

Qué cubre este vídeo

Johan and Malin fabricate and install 7-meter-long side deck panels for their custom boat build. To ensure structural integrity for stanchions and mid-cleats, Johan integrates G10 solid epoxy-glass inserts into the foam-core panels.▶ 1:55 He uses an extension table to laminate the panels, applying three layers of fiberglass on the top and two on the bottom using a vacuum-bagging process.▶ 6:37 After curing, he trims the panels to account for hull reinforcement near the top shrouds and positions them to accommodate 3.5-meter-long tracks for the jib cars.▶ 11:27 Johan chooses to place the mid-cleats at the hull's widest point to prevent dock lines from slapping against the topsides.▶ 13:27 The installation confirms the hull's structural alignment with the original computer-aided design.▶ 11:54 The project concludes with the panels temporarily set in place, awaiting final tabbing to the hull structure.▶ 21:34

Más de RAN Sailing

From Laser Precision to Endless Sanding - Ep. 497 Ran Sailingjul 2026Is This The Detail The Boat Has Been Waiting For? - Ep. 496 Ran Sailingjul 2026The Hardest Part Of Building A Boat - Ep. 495 Ran Sailingjul 2026Port Side Toe Rail & Deckhouse Carbon Corners - Ep. 494 Ran Sailingjul 2026

De RAN Sailing — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.