BoatworksToday · video

¿Qué cubre este video?

Andy prepares a cabin top for final fairing after applying a layer of chop strand mat and a top coat of waxed gel coat.0:18 The gel coat serves to cure the underlying fiberglass and fill minor surface imperfections, though some low spots remain.0:23 To prepare the surface for fairing, he uses a Scotch-Brite pad to dull the high-gloss finish and etch the dimples.1:21 For the fairing process, he mixes West System epoxy with 410 filler to a ketchup-like consistency, which allows the compound to flow into low spots and self-level, reducing the need for extensive sanding.2:13 He avoids power sanders for this stage, opting for hand-sanding to maintain control over the contours.3:59 Around the hatch openings, he applies Total Boat Total Fair using a tongue depressor to establish a consistent 1/8-inch radius along the perimeter.4:24

Más de BoatworksToday

I Was Wrong About My Boat's Victron Wiring (You Were Right!)sep 2026Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!ago 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!ago 2026

De BoatworksToday — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.